📺 How to Setup IPTV on Enigma 2 via Putty (Telnet)

Step 1: Find the IP Address on Your Enigma 2 Box

1. Go to: Settings > Setup > System > Network > Device > Adapter Settings
2. You will see your IP address (e.g., 192.168.1.xxx) — write it down.

💻 Step 2: Download & Install Putty on Your PC

Step 2: Download Putty

1. On your PC, go to [https://www.putty.org](https://www.putty.org)
2. Download and install the Putty Telnet client.

🌐 Step 3: Connect to Your Enigma 2 Box via Telnet

Step 3: Open Putty and Connect

1. On your PC, go to [https://www.putty.org](https://www.putty.org)
2. Download and install the Putty Telnet client.

🔐 Step 4: Log in with Root Access

Step 4: Login Credentials

When the black terminal window opens:
– Username: `root`
– No password is usually required — just press Enter.

📥 Step 5: Enter the IPTV Command

Step 5: Paste IPTV Command

1. Copy your IPTV m3u URL (provided by your IPTV service)
2. Right-click in the Putty window to paste the command
3. Press Enter

🔁 Step 6: Reboot the Device

Step 6: Reboot the Device

1. Type `reboot` in the terminal
2. Press Enter
3. Your Enigma 2 box will restart and load the IPTV playlist.

🟢 Final Step: IPTV is Ready!

✅ You’ve now successfully installed IPTV on your Enigma 2 device using Telnet and Putty.